危化品事故应急辅助决策支持系统的研究

该文提出了以一个事故工程文件处置、管理一次事故的思想。根据危险化学品事故发生的一般特点和事故处置的一般程序，建立了危险化学平事故应急辅助决策支持软件平台。该软件平台利用GIS技术实现了事故的基本情况、事故初始处置、事故事态发展、现场监测预警等功能，在软件平台的基础上搭配相应的硬件设备组成一套完整的应急辅助决策系统。     

国家实施污染预防的政策建议

文章对我国污染预防现状进行了评估，并对如何进一步实施污染预提出初步建议，形成污染预防框架行动计划，试图人们从行为和观念转向污染预防提供方向。框架行计划着重从政策和法律，组织和人力资源，研究和开发，污染预防活动和实践到评估、推广等方面进行了建议。     

Application of fuzzy sets and cognitive maps to incorporate social science scenarios in integrated assessment modelsA case study of urbanization in Ujung Pandang, Indonesia

Decision–support systems in the field of integrated water management could benefit considerably from social science knowledge, as many environmental changes are human-induced. Unfortunately the adequate incorporation of qualitative social science concepts in a quantitative modeling framework is not straightforward. The applicability of fuzzy set theory and fuzzy cognitive maps for the integration of qualitative scenarios in a decision–support system was examined for the urbanization of the coastal city of Ujung Pandang, Indonesia. The results indicate that both techniques are useful tools for the design of integrated models based on a combination of concepts from the natural and social sciences. This revised version was published online in July 2006 with corrections to the Cover Date.     

斜拉桥支架法施工的自适应安全监测技术

介绍自适应控制的基本原理及其运用现状。根据斜拉桥的实际情况选用自适应控制形式,在主要部位埋设传感器和相关的测试仪器,明确监测时间并在实施中严格执行。依据实测结果对标高、应力、容重等参数按实际情况进行修正,得出施工过程中的受力状态,从而调整施工。算出主梁各节点理论施工预拱度变化曲线等数据并与实测值进行比较,反复修正。自适应法达到了仿真计算与实际施工过程保持一致的最佳施工控制效果。绥芬河斜拉桥的施工证明,自适应法是一种很适合斜拉桥支架施工安全监测的技术,值得推广应用。     

Optimal Expansion Strategy for a Sewer System under Uncertainty

Because of fast urban sprawl, land use competition, and the gap in available funds and needed funds, municipal decision makers and planners are looking for more cost-effective and sustainable ways to improve their sewer infrastructure systems. The dominant approaches have turned to planning the sanitary sewer systems within a regional context, while the decentralized and on-site/cluster wastewater systems have not overcome the application barriers. But regionalization policy confers uncertainties and risks upon cities while planning for future events. Following the philosophy of smart growth, this paper presents several optimal expansion schemes for a fast-growing city in the US/Mexico borderlands—the city of Pharr in Texas under uncertainty. The waste stream generated in Pharr is divided into three distinct sewer sheds within the city limit, including south region, central region, and north region. The options available include routing the wastewater to a neighboring municipality (i.e., McAllen) for treatment and reuse, expanding the existing wastewater treatment plant (WWTP) in the south sewer shed, and constructing a new WWTP in the north sewer shed. Traditional deterministic least-cost optimization applied in the first stage can provide a cost-effective and technology-based decision without respect to associated uncertainties system wide. As the model is primarily driven by the fees charged for wastewater transfer, sensitivity analysis was emphasized by the inclusion of varying flat-rate fees for adjustable transfer schemes before contracting process that may support the assessment of fiscal benefits to all parties involved. Yet uncertainties might arise from wastewater generation, wastewater reuse, and cost increase in constructing and operating the new wastewater treatment plant simultaneously. When dealing with multiple sources of uncertainty, the grey mixed integer programming (GIP) model, formulated in the second stage, can further allow all sources of uncertainties to propagate throughout the optimization context, simultaneously leading to determine a wealth of optimal decisions within a reasonable range. Both models ran for three 5-year periods beginning in 2005 and ending in 2020. The dynamic outputs of this analysis reflect the systematic concerns about integrative uncertainties within this decision analysis, which enable decision makers and stakeholders to make all-inclusive decisions for sanitary sewer system expansion in an economically growing region.     

FARMERS' ATTITUDES TOWARD NONPOINT POLLUTION CONTROL AND PARTICIPATION IN COST-SHARE PROGRAMS1

The success of government programs to control nonpoint source pollution depends upon attitudes toward those programs and the availability of technical and financial assistance. Applicants for the Rural Clean Water Program cost-share funding in Virginia possess different personal and operational characteristics than do nonapplicants. Factors associated with participation in the Rural Clean Water Program differed from those associated with the more traditional soil conservation programs. Discriminant analysis was used to differentiate between other farmers who may become applicants and nonapplicants. Farmers' attitudes toward various policy options for inducing implementation of nonpoint source management practices varied greatly. Farmers were most favorable to cost sharing, low-interest loans and tax credits, and least favorable to a soil loss tax. They were either very favorably or very unfavorably inclined toward cross-compliance between pollution control and other agricultural programs.     

蒙脱土原位生长MoS2复合材料光催化降解罗丹明B的机理研究

通过在Na⁺-MMT表面生长MoS₂来提高窄带隙半导体光生电子分离速率及稳定性.利用阳离子填充法及水热法成功制备了复合光催化剂Na⁺-MMT/MoS₂,并通过FT-IR、SEM、TEM、Raman、XRD、TG、XPS、UV-DRS和ESR等表征进一步证明了材料的成功负载及光、电化学性能. 同时,以有机染料罗丹明B为待降解染料来评价光催化剂的催化性能,发现其在80 min可有效降解罗丹明B,降解率达96%.经过5次循环使用后,Na⁺-MMT/MoS₂复合光催化剂仍具有较好的光催化性能.因此,利用MMT的表面电负性及稳定的片层结构负载MoS₂,可形成光生电子迁移通道进一步提高电荷迁移速率及光催化剂的稳定性.本研究可为黏土材料调控窄带隙半导体制备环境友好型光催化剂提供新思路.     

Transitions of municipal solid waste management. Part II: Hybrid life cycle assessment of Swiss glass-packaging disposal

In policy support of municipal solid waste (MSW) management, life cycle assessment (LCA) can serve to compare the environmental or economic impacts of two or more options for waste processing. The scope of waste management LCAs generally focuses less attention on future developments, e.g., where will recycling take place, and more on the environmental performance of prototypes, e.g., the incineration of all waste compared to recycling. To provide more robust support for Swiss waste glass-packaging disposal, scenarios of Swiss waste glass-packaging are assessed from a life cycle perspective. The scenarios consist in schemes for the disposal of the total amount of Swiss waste glass-packaging, i.e., different combinations of recycling and downcycling in Switzerland or abroad developed in Part I, Meylan et al. (2013). In this article (Part II), the disposal schemes are assessed with respect to eco-efficiency, an indicator that combines total environmental impacts and gross value added in Switzerland. Results show that no policy alternative guarantees environmental impact reductions and gross value added gains under all developments of exogenous constraints. Downcycling to foam glass in Switzerland is not only an environmentally sound disposal option, but it also buffers gross value added losses in case domestic recycling (and thus glass-packaging production in Switzerland) ceases in the future. The substitution of products based on raw materials other than Swiss cullet is the main responsible for change in environmental and economic impacts. Hence, an eco-efficiency maximizing policy should consider the products of disposal schemes. The combination of scenario analysis and eco-efficiency assessment as presented in this paper can be applied to other contexts (i.e., countries, waste fractions).     

Implementation of Waste Electrical and Electronic Equipment Directive in Finland: Evaluation of the collection network and challenges of the effective WEEE management

Further to the European Waste Electrical and Electronic Equipment (WEEE) Directive, setting up efficient collection schemes is necessary to ensure the recovery targets set. Following the subsidiary principle, the WEEE Directive defines only the general requirements for mandatory collection and recycling objectives. The modalities of the logistics and the organisation of the take-back schemes are left to the choice of Member States. In this paper, the implementation of the WEEE Directive and the development of the WEEE recovery infrastructure in Finland are described and the challenges to the effective management of the WEEE recovery system in Finland are expressed. It can be said that the implementation of the WEEE Directive has succeeded in Finland and, at the same time, the legislative basis has been enacted. In addition, a functional WEEE recovery infrastructure has been built and, the collection requirements of the WEEE Directive have been exceeded in a relatively short time. However, the paper outlines that some inefficient practices still exist, particularly in the registration and WEEE collection stages. It is concluded that raising awareness would lead to a more environmentally sound behaviour and would, ultimately, improve WEEE recovery efficiency.     

基于任务成功率的装备综合保障工作体系及协同设计环境研究

本文介绍了基于任务成功率的装备综合保障工作体系框架,提出了可靠性、维修性、测试性、保障性、安全性协同设计环境要求,从而为进行可靠性、维修性、测试性、保障性、安全性综合优化设计奠定基础。